|
View previous topic :: View next topic
|
| Author |
Message |
christophersrq
Joined: 14 May 2004
Posts: 2
|
 Posted: Fri May 14, 2004 7:17 am Post subject: Placing/import images / only able to see items same layer? |
    |
|
| I have tried several ways to place or import images into my powercadd files. Including using image files with transparent backgrounds and the only way I can see other objects in the drawing is to have everyting on one layer. This is ok but somewhat of any un organized way to work. Any suggestions? Latest PCadd expert package and a G5. |
|
| Back to top |
|
 |
huc
Joined: 13 Apr 2004
Posts: 659
Location: ::caddpower.com:: (Aurora, CO)
|
| Posted: Fri May 14, 2004 7:55 am Post subject: |
|
|
A few choices come to mind. However, depending on the nature of the file being placed or imported and just what needs to be accomplished, other options may be available.
1) Put the raster data being Placed or Imported into the drawing on it's own layer. That layer could be at the bottm of the layer stack. This allows other objects to be on their own layers above the placed data and provides for a lot of control in organizing the drawing.
2) Raster images with transparent backgrounds will Import, Place, Open (etc.), with transparent bits = white. To change the white bits to nil (transparent) choose Tool menu > Convert to Bitmap. This would allow the raster data to be on top of object data. If the data is Placed or Imported requires being scaled down to fit your drawing conditions, it's best to apply Convert to Bitmap before the re-scaling operation.
Hope that helps - other choices may be available depending on just what you're trying to do.
Brian |
|
| Back to top |
|
|
christophersrq
Joined: 14 May 2004
Posts: 2
|
| Posted: Fri May 14, 2004 8:18 am Post subject: thanks! convert to bitmap worked. |
|
|
Brian
Thanks so much! I converted to a bitmap and that seemed to work I can see all of my layers.
Chris |
|
| Back to top |
|
|
|
blogger
del.icio.us
digg
slashdot
